HOW TO SERVICE MODE ON BROTHER PRINTERS

BROTHER MODELS

Brother DCP-L2500D

Maintenance Mode How to Enter

Operating Procedure

For models without touch panel
  1. Press the [Menu], and then the [Start] key while the machine is in the ready state. Then, press the [▲] key four times to enter the maintenance mode.
  2. “■■ MAINTENANCE ■■■” is displayed on the LCD to indicate that the machine entered the initial state of maintenance mode. The machine is ready to accept entry via keys.
  3. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, press the [▲] or [▼] key. Check that the desired maintenance mode is displayed on the LCD, and press the [OK] key. For models with keypad, you can enter the desired function code number directly with the keypad.
For models with touch panel
  1. Press and hold the [Home] key for approximately five seconds while the machine is in the ready state. The display shown on the right appears on the LCD.
  2. Press and hold the blank field at the bottom for approximately two seconds. The display shown on the right appears on the LCD.
  3. Press the [*], [2], [8], [6], and [4] keys in this order. The display shown on the right appears on the LCD, and the machine enters into maintenance mode.
  4. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed.

Brother DCP-L2510D

Maintenance Mode How to Enter

Operating Procedure

For models with touch panel

  1. Press and hold the [Home] for approximately five seconds while the machine is in the ready state. The display shown on the right appears on the LCD.
  2. Press the blank field at the bottom. The display shown on the right appears on the LCD.
  3. Press the [*], [2], [8], [6], and [4] in this order. The display shown on the right appears on the LCD, and the machine enters into maintenance mode.
  4. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed.

For models without touch panel

  1. Press the [Menu] and then the [Start] while the machine is in the ready state. Then, press the [▲] four times. “■■MAINTENANCE■■■” appears on the LCD and the machine enters the maintenance mode.
  2. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed. For models without keypad, press the [▲] or [▼] to display any of the maintenance mode functions shown in the “List of Maintenance Mode Functions” on the LCD and select it by pressing the [OK].

Brother DCP-L5500D

Maintenance Mode How to Enter

Operating Procedure

  1. Press and hold the [Home] key for approximately five seconds while the machine is in the ready state. The display shown on the right appears on the LCD.
  2. Press the blank field at the bottom. The display shown on the right appears on the LCD.
  3. Press the [*], [2], [8], [6], and [4] keys in this order. The display shown on the right appears on the LCD, and the machine enters into maintenance mode.
  4. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed.

Brother DCP-L6600DW

Maintenance Mode How to Enter

Operating Procedure

  1. Press and hold the [Home] key for approximately five seconds while the machine is in the ready state. The display shown on the right appears on the LCD.
  2. Press the blank field at the bottom. The display shown on the right appears on the LCD.
  3. Press the [*], [2], [8], [6], and [4] keys in this order. The display shown on the right appears on the LCD, and the machine enters into maintenance mode.
  4. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed.

Brother HL-L2300D

Maintenance Mode How to Enter

Operating Procedure

  1. Press and hold the [Home] key for approximately five seconds while the machine is in the ready state. The display shown on the right appears on the LCD.
  2. Press the blank field at the bottom. The display shown on the right appears on the LCD.
  3. Press the [*], [2], [8], [6], and [4] keys in this order. The display shown on the right appears on the LCD, and the machine enters into maintenance mode.
  4. To select any of the maintenance mode functions shown in the “List of Maintenance Mode Functions”, use the keypad to enter the maintenance mode function code to be executed.